Launching Summer 2026. First-run inventory is limited
MR. DIVOT™ | Stand-Up Ball Mark Repair Tool
Fix your ball mark standing up.
No bending. Every time.
Meet MR. DIVOT™ — The first full-length ball mark repair tool built for the golfer who fixes every mark — and has started feeling it
A few years ago I started noticing something on the green I couldn't un-notice. Experienced golfers — good golfers who absolutely know better — were quietly skipping their ball mark repairs. Not out of laziness. You could see it just wasn't as easy as it used to be. I built MR. DIVOT for that moment. Pull it from the bag with your putter. Fix the mark standing upright. Stick it in the green while you putt. No bending. No excuses. No guilt. - Ed Butler, Founder
Launching Summer 2026. First-run inventory: 300 units.
Reserve your spot now — first access when orders open.
No payment required.
The same divot tool has existed for fifty years.
Nobody improved it. We did.
The tool in your bag requires you to bend down, fix the mark, and straighten back up. Simple — unless straightening back up has gotten a little more complicated than it used to be. MR. DIVOT™ is full length. Pull it from the bag with your putter, fix the mark standing completely upright, stick it in the green while you putt. Three seconds. No bending. No excuses. No guilt.
✓ No bending. Standing upright. Every single time.
✓ Fits in your bag right alongside your putter
✓ Fix every mark, fix it right — without thinking about it
Good for your back. Good for the green. Good for the game.
The Bend Nobody Talks About
It's not the swing. It's not the walk. It's something smaller and more constant that almost no golfer thinks to mention.Every time you fix a ball mark, you bend. Head down, back bent. The same movement your body stopped forgiving somewhere around fifty. You do it because you were taught to. Because you care about the course. Because it's the right thing to do.The golfers who care most are bending the most. And they're the ones who feel it most — that night, and the next morning.
Nobody built a tool that acknowledged that. Until now.
Meet MR. DIVOT™
A full-length, stand-up ball mark repair tool. Putter-length. Steel shaft. Purpose-built grip. Fits in the bag alongside your putter.
The tool in your bag right now requires you to bend down to use it. That's not a design flaw — it's just that nobody ever questioned it.MR. DIVOT is putter-length. You pull it from the bag with your putter, fix the mark standing completely upright, and stick it back in the bag. Same repair. Same ten seconds. No bend.The tines work exactly the way they're supposed to — proper ball mark repair technique, every time, from a standing position. The green gets fixed right. Your back stays out of it.
✓ Putter-length steel shaft — stands upright, works upright
✓ Purpose-built grip — pull it, use it, replace it. One motion.
✓ Fits in the bag — right alongside your putter, where it belongs
It's not a gadget. It's not a gimmick. It's the tool that should have existed fifty years ago.
Two Models. One Standard.
Both fix every mark. Both stand full length. Both belong in the bag. The difference is in the grip.
| MR. DIVOT™ Classic | MR. DIVOT™ Tour |
|---|---|
| Pistol Putter Grip | Oversized Jumbo Grip |
| All Black Finish Grip | Black and Gray Finish Grip |
| Smooth Texture Grip | Textured Surface Grip |
| Stepped Steel Shaft | Stepped Steel Shaft |
| 34.5" total length | 34.5" total length |
| No logo | MR. DIVOT logo on grip |
| $49, free domestic shipping | $59, free domestic shipping |
| The right tool, built right. The Classic grip is modeled after the pistol putter grip most golfers already know — familiar in the hand, precise on the mark. No frills. No compromises. | More grip. More control. More of everything the serious golfer wants in their hand. The Tour's oversized jumbo grip gives you enhanced feel and a confident hold — and it's the only model that carries the MR. DIVOT™ logo. |
Not sure which one is right for you? If you already love your putter grip, go Classic. If you prefer an oversized feel, go Tour.
Either way — no bending.
Why I Built This
Ed Butler, Founder, MR. DIVOT™
I've been playing golf my whole life. For most of those years, I finished a round feeling pretty good.Then somewhere in my fifties, something changed. Not the swing. Not the walk. The bending. Specifically, bending over to fix ball marks — the thing I do every round because I was taught to, because I care about the course, because it's the right thing to do.I started paying attention to what was actually causing it. And then I looked at the tool in my bag and had a thought I couldn't shake: nobody ever adequately improved this thing.So I built one that did.MR. DIVOT™ is hand-assembled in my warehouse in Chico, California. I ship every order myself. I'm not trying to disrupt the golf industry. I'm just trying to help golfers enjoy the game for as long as they possibly can.If you're the golfer who fixes every mark, who sometimes still feels it the next morning — this was made for you.— Ed Butler, Founder
Chico, California
About MR. DIVOT™
We exist because one thing in the golf bag got left behind.
Drivers evolved. Irons got lighter. Putters became precision instruments. Rangefinders, GPS, performance footwear — the modern golfer has access to equipment that would have seemed like science fiction a generation ago.The ball mark repair tool didn't change. Not meaningfully. Not for the golfer who needed it to.We built MR. DIVOT™ for the golfer who loves this game and plans to keep playing it. The one who fixes every mark, takes the course seriously, and has started noticing that some of the things that used to feel effortless don't anymore. Not because the passion is gone. Because the body keeps an honest scorecard.Two models. One standard. Every unit hand-assembled and shipped from Chico, California by our founder — a lifelong golfer who got tired of waiting for someone else to solve this.We're not here to reinvent golf. We're here to make sure you can keep playing it.
Fix Your Ball Mark — Save Your Back.
Frequently Asked Questions
THE PRODUCT
Q: How long is MR. DIVOT?
A: MR. DIVOT is 34.5" long — putter-length. Long enough to use standing completely upright without any bending.Q: How does it fit in the bag?
A: It slides into your bag alongside your putter, in the same pocket or slot. Pull them out together, use MR. DIVOT on the green, replace it with your putter. One motion.Q: Does it actually repair ball marks correctly?
A: Yes. The tines are designed for proper ball mark repair technique — working from the outside in, lifting and closing the damaged turf. Same repair you've always made, just from a standing position.Q: How is this different from a regular ball mark repair tool?
A: Every divot tool or ball mark repair tool in every golf bag right now requires you to bend down to use it. MR. DIVOT is full length — you use it standing completely upright. That's the entire difference, and for golfers over fifty it's a significant one.
THE GOLFER
Q: Is this only for golfers with back problems?
A: Not at all. MR. DIVOT is for any golfer who fixes every mark and wants to keep doing it without the cumulative physical cost. You don't need to be in pain to appreciate not bending over fifty times a round.Q: I've been fixing ball marks the same way for thirty years. Why change now?
A: You don't have to change anything. Same repair, same ten seconds, same result. Every divot tool works the same way — MR. DIVOT just removes the one part of the process that's been quietly taxing your back for decades..
THE MODELS
Q: What's the difference between the Classic and the Tour?
A: The grip. The Classic uses a pistol putter grip — familiar, precise, all-black. The Tour uses an oversized jumbo grip with a textured surface and the MR. DIVOT™ logo. Both are the same length, same shaft, same repair performance. Choose based on the grip feel you prefer.Q: Which model should I choose?
A: If you already love your putter grip, go Classic. If you prefer an oversized feel or want the premium finish, go Tour. Either way you're getting the same no-bend repair — and the last divot repair tool you'll ever need.
THE BRAND
Q: Who makes MR. DIVOT?
A: MR. DIVOT is designed and founded by Ed Butler, a lifelong golfer based in Chico, California. Every unit is hand-assembled and shipped by Ed personally from his warehouse in Chico.Q: Where is MR. DIVOT made?
A: Every MR. DIVOT is hand-assembled and shipped directly from our warehouse in Chico, California.Q: When will MR. DIVOT be available?
A: We're launching in 2026. First-run inventory is limited to 300 units. Reserve your spot now to be first in line for pricing and availability.Q: Is my email address safe?
A: Yes. Your email is never shared, sold, or used for anything other than MR. DIVOT launch updates. Unsubscribe anytime.
Be First in Line
300 units. That's the entire first run.
When they're gone, the next run is months away.
Reserve your spot — no payment required.
Just your email.
Your email is never shared or sold. Unsubscribe anytime.
Good for your back. Good for the green. Good for the game.
© 2026 MR. DIVOT™ · All Rights Reserved · [email protected]